Spud Raider
Site Admin
User avatar
Posts: 433
Joined: Sun Apr 15, 2012 1:47 am

Stop Codes, Attn:Synch!

Postby FiSH » Fri Dec 07, 2012 2:25 pm

Synch, can you post that stop code reference chart that did back at FS? My brother's capable laptop is getting bsod's every time he opens his Photoshop Elements program.

Thanks!
FiSH
Image

Spud Raider
User avatar
Posts: 545
Joined: Sat Apr 14, 2012 7:14 pm
Location: Washington, D.C.

Re: Stop Codes, Attn:Synch!

Postby Synchronicity » Fri Dec 07, 2012 2:36 pm

This was mostly for older i7 systems that are being overclocked but it's more or less universal:

BSOD codes for overclocking:
0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r

BSOD Codes for SandyBridge:
0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
“0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances”
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
Image

Spud Raider
Site Admin
User avatar
Posts: 433
Joined: Sun Apr 15, 2012 1:47 am

Re: Stop Codes, Attn:Synch!

Postby FiSH » Fri Dec 07, 2012 2:47 pm

Awesome. Thanks a bunch!
Image

Return to Software / Applications

Who is online

Users browsing this forum: No registered users and 1 guest